FAQs - BIGBIG WON

Q: How to connect console with R90

1: Connect the R90 to the controller with a USB cable, and then insert it into the USB port of the console; 2: The indicator of the controller will be always on, press the HOME button of the controller to connect successfully.

Q: The perspective is shaking after ope motion cocntrol

Adjust the curve a bit lower in the motion aim settings (the default curve value is higher)

Q: The perspective drifts after turning on the gyroscope to simulate the right stick

Calibrate the gyroscope. The controller need to be placed on the desktop horizontally. Press the FN + screenshot key to start the calibration. The four indicator lights will turn off after double flashing, the calibration is successful.

Q: The motion control is lagging.

First, set the dead zone of the right joystick perspective to 0 in the game. If it is still not smooth enough, open the APP, adjust the gyroscope curve under the somatosensory setting to 0, and then slowly increase the dead zone compensation until the motion control is smooth. (The controller setting has a higher inverse curve by default, and if the curve value is too large to a certain level, it will also have the effect of dead zone compensation)

Q: The game does not recognize the device, but the controller test software can recognize the device normally

This happens because after the game detects multiple input devices, the anti-plug-in system blocks the unrecognized devices; The xbox controller can be recognized normally because the xbox has an authentication chip, and the game can know exactly what device is inserted. All "third-party controllers" may have the above situation after repeatedly plugging and unplugging the controller after entering the game. The only way to recover is to restart the computer (you can also try to completely close the game process and restart the game). In addition, insert the handle before starting the game, and try to avoid repeatedly plugging and unplugging the handle after starting the game.

Q: After plugging in the computer, the light turns on, but the computer does not recognize the device

Confirm that the controller connection indicator is oConfirm that the controller connection indicator is on (the indicator above the logo button). The xinput mode is green and the swConfirm that the controller connection indicator is on (the indicator above the logo button). The xinput mode is green and the switch mode is red. If it does not light up it means that the handle is not successfully connected. check whether the data cable is firmly plugged in itch mode is red. If it does not light up it means that the handle is not successfully connected. check whether the data cable is firmly plugged in n (the indicator above the logo button). The xinput mode is green and the switch mode is red. If it does not light up it means that the handle is not successfully connected. check whether the data cable is firmly plugged in

Q: RAINBOW has no linear trigger on switch

The SWITCH protocol does not support linear triggers, and all switch handles do not have linear triggers

Q: The joystick is reversed

Open the APP to see if the joystick X-axis Y-axis reversal is turned on

Q: RAINBOW cannot control after connecting directly to switch

It is necessary to open the "Enable Wired Connection" of SWITCH (refer to the manual for detailed steps)