FAQs - BIGBIG WON

Q: How to connect Rainbow 2 Pro with mobile app?

1. Rainbow 2 Pro comes with Bluetooth, you can search Xbox Wireless Controller in the Bluetooth list of your mobile phone after you turn it on; 2. Open BIGBIG WON APP in iOS mobile phone, select the device as C1 Pro in the upper left corner, and then click the "Connect Now" button in the middle of the screen directly. 3. On Android mobile phones, you need to open the "BIGBIG WON APP" permissions (Bluetooth, location, nearby devices, pop-up windows and other permissions), and then open the BIGBIG WON APP and click "Connect Now".

Q: How do I calibrate the motion control on Rainbow 2 Pro?

Method 1: Controller+Armor-X, switch on the motion control function after powering on the controller, and then put it on the desktop and stand still for more than 10 seconds will automatically start calibration. It is recommended to pick up the controller after 15 seconds. Method 2: Press the Xbox controller's menu + screenshot button to trigger the gyroscope to calibrate manually; After entering the calibration mode, the LED on the right side of the Armor-X back button RGB2 breathes purple, and the purple blinks fast two times when the calibration is completed. If the calibration fails there will be no fast flash. Note: If manual calibration fails, please repeat the above operation.

Q: When I use Armour-X's motion control on the Switch, is it simulating the right stick as well?

Both origin and simulated motion control can be used on Switch.

Q: Why is it shaky when I use motion control, how do I adjust it?

1. in the motion control settings, adjust the curve value a little higher (the default curve value is relatively low, the higher the value, the lower the sensitivity at the beginning) 2. If you still feel shaky, you can lower the sensitivity of the gyroscope.

Q: What about lag when using the gyroscope to simulate the right stick?

1. Firstly, set the dead zone of the right stick to 0 in the game. 2. If it's still not silky smooth enough, open the APP, adjust the gyroscope curve to 0 under the motion control setting, and then slowly increase the dead zone compensation until the motion control is smooth. Note: (Joystick settings have a higher inverse curve by default, and the curve value will also have the effect of dead zone compensation if it is large to a certain extent).

Q: Why do I have this problem with the viewpoint drifting after I turn on the gyroscope to simulate the right stick?

Place the controller horizontally on the desktop, press the menu key + screenshot key to turn on the calibration, the light bar goes off after double blinking means the calibration is complete.

Q: How do I set up the motion control to turn on when I hold it and turn off when I release it?

1. FN+L3/R3 is to enable global motion control. 2. If you add a key to this key combination, such as FN+LT+R3, then LT is the switch for right stick emulation. 3. then LT is the switch for right stick simulation, hold down LT to turn on right stick simulation, release LT to turn it off.

Q: How do I turn on the simulated motion control?

1. FN+L3 or FN+R3; 2. Press FN+L3 if you want to simulate the left stick, and press FN+R3 if you want to simulate the right stick.

Q: How to turn on motion control on Switch?

The controller itself does not require any setup.

Q: Does the Rainbow 2 Pro support momtion control?

Support motion control, support Switch origin motion control, and simulated motion control on cross-platform. The principle of simulation is to use the gyroscope to simulate the movement of the right stick, so that games that do not support motion control also support motion control. Please watch this tutorial: