What platforms does Rainbow 2SE support?

Support PC, Switch, iOS and Android

What are the connection methods of Rainbow 2SE?

2.4G receiver, Bluetooth, USB wired

Can Rainbow 2SE be wired to Xbox and PS4?

No

Can the Rainbow 2SE be wired to the mobile phone?

Wired connection is not supported, Bluetooth connection can be selected

Does Rainbow 2SE support wireless audio?

Not supported

Where is the home button on Rainbow 2SE?

The ink logo key is the home button

What is the battery capacity of the Rainbow 2SE?

1000mAh

How many hours can the Rainbow 2SE last in wireless mode?

Under normal use, it can reach about 15 hours (varies according to the vibration of the game)

The Rainbow 2SE battery is only 1000mAh, isn’t the battery life lower than the ARMORX 1300mAh?

The ARMORX 1300mh battery life is not only the power used by the ARMORX, but also the power that needs to be supplied to the controller. The Xbox controller is also caused by trigger vibration. The Rainbow 2SE can last up to 15 hours under normal use

What is the return rate of the Rainbow 2SE’s wired and 2.4G wireless mode controllers

Wired 1000Hz, 2.4G receiver 100Hz, Bluetooth 100Hz (switch mode fixed 125Hz)

Is the shell of the Rainbow 2SE replaceable?

Face shells are not replaceable

How does Rainbow 2SE reset the controller?

Press and hold the logo button for more than 10 seconds to reset, and the handle will vibrate when the reset is successful.

What is the size of the Rainbow 2SE?

107*157*mm

What kind of motor is the Rainbow 2SE?

Custom-made high-speed rotor motor

How do I enable simulated motion sensation?

After the handle is powered on, the FN+ left/right joystick can be pressed down to turn on and off the global somatosensory, or the somatosensory setting can be performed in the APP

Why does my Rainbow 2SE turn on when I plug it into my computer, but my computer doesn’t recognize the device?

Check whether the controller logo key indicator is always on
The xinput mode is green, and the switch mode is red.
If it does not light up, it means that the handle is not successfully connected, check whether the handle is firmly plugged in with the data cable interface

Does trigger shock support?

Trigger shock is not supported

Why can’t I control my Rainbow 2SE directly after connecting it to the switch?

After the receiver is connected to the wired switch, you need to turn on “Settings – Controller and Sensor – Rainbow 2SE Controller Wired Connection On”